Pent Summerhouse 257 - Double Glazed, Pressure Treated

Not your postcode?
Setting the first half of your postcode shows you the full choice in your area.
In a moment you may be asked to share your location. Please allow this so that we can show you the full choice in your area (inclusive of delivery charges). You may also set your location manually using the button above.

Click this messge to hide it.
Pent Summerhouse 257 - Double Glazed, Pressure Treated
1
2
3
4
5
6
7
Play Video
The pictures show the standard 8'x12' summerhouse. The pictures show the different designs available. The doors and windows in the front wall are interchangeable and the exact design can be decided on site.

Summary:

These pent roof summerhouses feature double glazing and thicker than normal 15mm tongued and grooved cladding. Pressure treated timber is included as standard. Pressure treatment is a lifetime treatment. Standard features include a tongued and grooved floor and roof. The roof covering is durable one piece EPDM rubber. The pent roof design features a minimum internal height over 6'6" at the lowest point inside whilst keeping the overall ridge height below 2.5m. Low level panaramic glazing, heavy duty framing and key locking double doors are also included. Instructions are supplied for DIY self assembly.

Back to the Top
  • These summerhouses feature pressure treated timber (lifetime preservative treatment)
  • Scandinavian redwood or whitewood
  • Joinery doors and windows with morticed and tenoned joints
  • Fully glazed double opening hinged doors with 5 lever mortice lock fitted
  • Toughened double glazed doors and windows included as standard
  • Panoramic low level glazing with doors and sidelight windows fully glazed to the floor
  • 2 non opening fully glazed front windows
  • 2 non opening fully glazed side windows, one in each side wall
  • All timber construction with no chipboard, plywood, OSB or other man made boards or sheet materials
  • Substantial planed deal wall framework (finished size 45mm x 58mm after machining)
  • 15mm deal tongued and grooved shiplap wall cladding (finished size after machining)
  • Substantial ex 2" planed deal floor joists
  • 15mm deal tongued and grooved floor boards (finished size after machining)
  • Substantial ex 2" planed deal roof purlins
  • 15mm deal tongued and grooved roof boards (finished size after machining)
  • One piece EPDM rubber roof membrane, a tough roof surface which is virtually maintenance free
  • Double door width approximately 5'0" (1520mm)
  • Door height approximately 6'2" (1880mm)
  • Internal height at the lowest point inside approximately 6'8" (2023mm)
  • External height at the rear approximately 7'1" (2154mm)
  • External height at the front approximately 7'11" (2422mm)

SCANDINAVIAN REDWOOD OR WHITEWOOD: The most widely used timber in the UK for years, Scandinavian Redwood and Whitewood grow in the well managed forests of Scandinavia and the coldest parts of Northern Europe. The cold climate ensures slow growth. The growth rings are much closer together than faster growing trees from warmer climates. As a result the timber is heavy and durable with a close grain pattern. The wood is seasoned and kiln dried to achieve the correct moisture content before it is machined. Redwood and Whitewood are so similar in appearance and performance that it is difficult to tell the difference. Both are classified as slightly durable and treatment is required for outside use. The forests of Scandinavia and Northern Europe have been responsibly managed on a sustainable basis for centuries so Scandinavian Redwood or Whitewood is an enviromentally friendly choice.

THICKER CLADDING: A feature of this heavy duty summerhouse is thicker ex 3/4" cladding with a finished thickness of 15mm. The use of thinner cladding with a finished thickness of 12mm is almost universal throughout the industry. These 25% thicker boards are more substantial and longer lasting.

PRESSURE TREATED TIMBER: Pressure treatment is a lifetime preservative treatment. The preservative is forced deep into the timber under pressure in a vacuum and penetrates below the surface. All other treatments apply a coat of stain to the surface of the timber only. With pressure impregnated timber, the chemicals are permanently bonded to the cell structure of the wood at a molecular level. Tanalith E is a widely used water based version so pressure treated wood is often described as tanalised. Pressure treated wood is almost colourless except for a slight green tint caused by the copper content in the preservative. No further preservative treatment is ever needed. However, if you want a coloured finish you can paint over pressure treated or tanalised wood with normal wood preservative in any colour.

TONGUED & GROOVED FLOOR & ROOF - NO MAN MADE BOARDS: The floor and roof feature 15mm thick tongued and grooved boards with 2" thick framing. This is stronger and longer lasting than cheaper summerhouses with man made boards used in the floor and roof. Man made boards are often only 7mm thick and do not last as long in damp conditions. Floors made with man made boards are normally too flimsy even for light use. The man made boards commonly used in cheaper summerhouses include chipboard and OSB or oriented strand board. These are often described as a "sheet floor" or a "solid board floor" which is deliberately misleading.

JOINERY DOORS AND WINDOWS: A feature of these quality summerhouses is the joinery doors and windows with morticed and tenoned joints throughout. These intricate joints are harder to pull apart and therefore stronger. The ends of the timber are also better protected and therefore more durable.

HEAVY DUTY FRAMING: These heavy duty summerhouses feature exceptionally strong framing, which ensures a more robust and durable building. Framing timber is normally supplied in standard timber sizes. The nominal size is the size before machining. The finished size after planing is normally around 5mm smaller. Framing of at least 50x25mm or 38x38mm nominal thickness is recommended for smaller summerhouses up to 6'x8'. Framing of at least 50x38m nominal thickness is recommended for larger summerhouses up to 8'x10'. Framing of 2"x2" or 50x50mm nominal thickness or larger is recommended for the largest summerhouses.

TOUGHENED SAFETY GLASS: Toughened safety glass is around 6 times stronger than normal glass so it is less likely to break. When it does break, toughened glass breaks into harmless small pieces. This makes toughened glass the best option for all the family including children, pets and the elderly.

ONE PIECE EPDM ROOF: A tough EPDM rubber membrane is made in one piece to the size of your roof with no joins. It is easily fitted within a few minutes at normal temperatures with no heat required. EPDM rubber is completely inert, UV stable and not affected by extreme temperatures. It never perishes and it will not rot, split, crack or degrade. EPDM rubber lasts for years with little or no maintenance. It has been widely used in flat roofing for over 40 years from Alaska to the Middle East. It is increasingly popular in the UK where it is widely used for re-roofing flat roof garages and extensions. Even in extreme weather conditions EPDM rubber remains flexible and it will stretch to absorb any movement as a timber roof expands and contracts with the seasons.

SIZES - DEPTH AND WIDTH: Sizes are sometimes rounded to the nearest nominal size for ease of reading but the correct external wall sizes are listed alongside the price. The first dimension listed is the depth and the second dimension is the width. The depth refers to the sloping wall. The sizes listed are the external wall sizes. These sizes do not include the roof overhang. Many other suppliers quote the overall roof size which is much larger. All sizes are approximate.

Back to the Top
In stock now - log cabins, metal sheds, greenhouses, gazebos, garden furniture